Browning Superposed, Superlight Stock, 12 Gauge, Diana Grade
|Description: Browning Belgium Superposed, 12 Gauge Shotgun Butt Stock, Superlight. Field Dimensions, Diana / Pointer Grade Checkering. Browning Factory Original Superposed Superlight Shotgun Butt Stock U-Inlet. To determine inletting style click here. Requires fitting by qualified and properly trained gunsmith.|
|Condition: Factory new!!|
|Finish -||High Gloss Finish|
|Checkering -||Browning Factory Cut, Diana / Pointer Grade Checkering|
|Butt Plate -||Browning Factory Installed Butt Plate|
|Note: It is recommended that all Browning parts be installed by a qualified and trained gunsmith.|
- Brand: Browning
- Finish / Color: Gloss
- Firearm Type: Shotgun
- Gauge: 12 Gauge
- Material: Wood
- Models Fit: Browning Superposed
Know Your Gun
Browning Superposed History
The production of the Browning Superposed over/under shotgun began in 1931. It has gone through many configurations in the years and is currently still in production through the Browning International Custom Shop.
The information below is critical must have knowledge necessary for ordering parts, wood, and barrels for your Browning Superposed.
What "Configuration Type", "Tang Style", and "Inletting Style" is your Superposed?
- Locating your serial number
The true complete serial number of the Superposed can only be found underneath of the TOP LEVER. All other numbers represent production sequence only and are used by the factory to denote what barrel set is paired with an individual receiver. See figure 1-A to locate the top lever on your firearm.
- Reading Your Serial Number
Below, use the chart to determine the year your Superposed was manufactured.
Date Historic Information Serial Number Info 1931-1939 Production of the Superposed 12 ga. began in 1931. 1-17,000
Exact production figures are not available. Year of manufacture on Pre-World War II production is strictly a guess at best.
1939-1947 Production ceased during World War II 1948 17100-17200 1949 Production of the 20 ga. began. First series of numbers are for the 12 ga. Second series of numbers are for the 20 ga.
These serial numbers for each year from 1949-63 are best guess.
12 ga.: 17201-20000
20 ga.: 100-1700
1950 12 ga.: 20001-21000
20 ga.: 1701-2800
1951 12 ga.: 21001-27000
20 ga.: 2801-2100
1952 12 ga.: 27001-33000
20 ga.: 3201-5300
1953 12 ga.: 33001-37000
20 ga.: 5301-6700
1954 12 ga.: 37001-43000
20 ga.: 6701-8400
1955 12 ga.: 43001-48000
20 ga.: 8401-9400
1956 12 ga.: 48001-54000
20 ga.: 9401-10500
1957 12 ga.: 54001-59000
20 ga.: 10501-11500
1958 12 ga.: 59001-68500
20 ga.: 11501-14180
1959 12 ga.: 68501-76500
20 ga.: 14181-17060
1960 12 ga.: 76501-86500
20 ga.: 17061-20640
1961 12 ga.: 86501-96500
20 ga.: 20641-23820
1962 12 ga.: 96501-99999
20 ga.: 23821-27300
1963-1968 From 1962 serial numbers were followed by the date of manufacture.
2S=12 gauge for the year 1962.
2V=20 gauge for the year 1962.
2F=28 gauge for the year 1962.
2J=.410 bore for the year 1962.
Example: 6556S2 = A 1962 Superposed 12 ga. shotgun with serial number 6556.
1969-1975 1969 started using two digits for the date of manufacture:
This was then preceded by the serial number beginning with 1000.
Example: 1000S69 = A 1969 Superposed 12 ga.. shotgun with a serial number of 1000.
In 1975 Browning standardized its serial number identification which it followed until 1998.
- Superposed Type:
- Date of Manufacture is a two digit code:
Z=1, Y=2, X=3, W=4, V=5, T=6, R=7, P=8, N=9, M=0
- Serial Number beginning with 01001 at the start of each year.
Serial Number Example:
This would be an Superposed 12 ga., manufactured in 1976 with the serial number 01001.
Using the above chart you should now be able to distinguish the year and gauge of your Superposed.
- Superposed Type:
- Determining Tang Style
The Browning Superposed was manufactured with 3 "Tang Styles"
- Straight Tang also know as Superlight
- Long Tang
- Short Tang
Use Figure 1-B to determine the "Tang Style" of your Superposed.
- Determining "Inletting" Type
Two "Inletting" types have been used in the production of Superposed Shotguns.
- "Y" Inlet
- "U" Inlet
Use Figure 1-C to determine what "Inletting" type your Super uses. Most pre 1967 Superposed were manufactured with the "Y" Inletting however, if your Superposed is a 1966, it could be a "Y" or "U" inlet.
With this information, you should be able to correctly identify the most important aspects of your Superposed.
Thank you very much for taking the time to review the above information. If you are in need of more assistance or you have found the above information a useful shopping tool please contact us at firstname.lastname@example.org.
Customer Ratings & Reviews
Be the first to rate this item!