FN FN-15 DMR3 Rifle, 5.56x45mm 18" Barrel, Tungsten Gray
Product Description
Description: FN FN-15 DMR3 Rifle, 5.56x45mm 18" Barrel, Tungsten Gray. Designed by FN America and chambered for .223 Rem / 5.56x45mm, this FN-15 DMR3 rifle boasts a CMV steel 18" chrome-lined barrel and a 30 round magazine. The Designated Marksman Rifle (DMR) features a tungsten gray anodized aluminum alloy receiver with a collapsible stock and a free-floating M-LOK handguard installed over the barrel. The barrel comes with a SureFire ProComp brake mounted to the muzzle to promote better follow-up shots and help manage recoil. The FN-15 DMR3 is built for quality and consistent shots no matter the situation.
Enhanced accuracy from the FN 15 DMR3 enabling you to keep on target for faster shot-to-shot recovery is achieved from the combination of the 18inch hybrid profile barrel, rifle-length gas system, Geissele two-stage G2S trigger and SureFire ProComp muzzle brake that greatly reduces both recoil impulse and muzzle rise and that allows precise and accurate trigger control. The rifle also features a fully free-floated Hodge Defense-designed wedge lock handguard, a low-profile gas block that is pinned to the barrel, HP/MPI-tested and certified bolt and M16-style bolt carrier group for complete reliability and performance.
| CALIBER | 5.56x45mm |
| CAPACITY | 30 |
| OPERATING SYSTEM | Direct Impingement |
| MAG TYPE | AR-15 |
| RECEIVER MATERIAL | Aluminum Alloy |
| RECEIVER FINISH | Hard Anodized Tungsten Gray |
| FOREND | Free-Float M-LOK |
| TOP RAIL SYSTEM | M1913 Mil-Spec |
| BARREL LENGTH | 18 in (457 mm) |
| BARREL MATERIAL | CMV Steel w/ Chrome-Lined |
| TWIST RATE | 1:8" RH |
| BARREL ACCESSORY | SureFire ProComp Brake |
| STOCK TYPE | Adjustable |
| OVERALL LENGTH | 35.2 - 38.5in (894 - 978mm) |
| HEIGHT | 10.25in (260mm) |
| WIDTH | 2.75in (70mm) |
| WEIGHT | 7.4 lbs (3.36 kg) |
FN 15 DMR3
At the heart of the DMR3 is the FN hammer forged, 18-inch, 1:8 twist, chrome lined barrel. The barrel has FN's Hybrid profile that provides the stiffness and heat absorption needed for accurate, high volume shooting. Long barrel life is achieved by hammer forging from FN's proprietary "machine gun barrel" steel and chrome lining.
Manufacturer: FN America
Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number
PRODUCT SPECIFICATIONS:
- Barrel Length: 18"
- Brand: FN America
- Caliber: .223 Rem,5.56x45mm
- Finish / Color: Gray
- Firearm Type: Rifle
- Magazine Capacity: 30
- Models Fit: AR-15,FN 15
- Type: Semi-Auto
Specifications
- Barrel Length: 18"
- Brand: FN America
- Caliber: .223 Rem,5.56x45mm
- Finish / Color: Gray
- Firearm Type: Rifle
- Magazine Capacity: 30
- Models Fit: AR-15,FN 15
- Type: Semi-Auto
Rules & Regulations
Firearm Purchasing Policy
Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:
- Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
- Payment must be received via Credit Card
Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.
Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303
Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.
Shipping
WE WILL ONLY SHIP TO VALID FFL DEALERS.
Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:
- Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
- Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.
* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.
Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.
It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.
States with applied firearm restrictions:
Stripped lower receivers will NOT be shipped to the following states:
- Connecticut
- Illinois
- Massachusetts
Complete AR and AK receivers will NOT be shipped to the following states:
- California
- Connecticut
- Illinois
- Maryland
- Massachusetts
- New Jersey
- New York
- Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
- California (No "assault weapons" can be shipped.)
- Connecticut
- Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
- Maryland
- Massachusetts
- New Jersey
- New York
- Washington
Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.
Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.
Midwest Gun Works DOES NOT offer refunds in place of the magazines.
States with applied magazine restrictions:
- California - no magazines greater than 10 rounds
- Colorado - no magazines greater than 15 rounds
- Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
- Delaware - no magazines greater than 17 rounds.
- Hawaii - no pistol magazines greater than 10 rounds
- Illinois -
- No pistol magazines greater than 15 rounds
- No rifle magazines greater than 10 rounds
- Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
- Maryland - no magazines greater than 10 rounds
- Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- New Jersey - no magazines greater than 10 rounds
- New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- Rhode Island - no magazines greater than 10 rounds
- Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
- Washington -
- No magazines greater than 10 rounds
- No semi-auto shotgun fixed magazine greater than 7 rounds
- Washington D.C. - no magazines greater than 10 rounds
Exceptions:
- L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
- Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
- Not all of the states listed may have L.E.O. exemptions.
- Please contact us BEFORE placing your order.
- Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
- Midwest Gun Works does NOT make exceptions for this policy.
