Ruger M77 Hawkeye FTW Hunter, 6.5 PRC, 24" Barrel
Product Description
Description: Ruger M77 Hawkeye FTW Hunter, 6.5 PRC, 24" Barrel. The Hawkeye FTW Hunter combines a stainless Ruger M77 Hawkeye barreled action with an H-S Precision stock. The Pro-Series H-S Precision tan-black speckled synthetic stock features a full-length aluminum bedding block and slender pistol grip with Pro-Center technology. The LC6 trigger features smooth, crisp performance right out of the box for increased accuracy on the range or in the field.
Features:
- Non-rotating, Mauser-type controlled round feed extractor is among the most positive case extraction systems ever invented, and features a fixed blade-type ejector that positively ejects empty cases as the bolt is moved fully rearward.
- Hinged, solid-steel floorplate for easy unloading without having to chamber each cartridge. Features an engraved FTW Hunter logo and patented latch that is flush with the trigger guard to avoid accidental dumping of cartridges.
- 20 MOA Picatinny rail secured with four #8-40 screws for increased long-range elevation capabilities over the traditional integral scope mounts that are machined directly on the solid-steel receiver.
- Three-position safety is easily accessible and allows the shooter to lock the bolt or to load and unload the rifle with the safety engaged.
- Pro-Series H-S Precision tan-black speckled synthetic stock features a full-length aluminum bedding block and slender pistol grip with Pro-Center technology.
- The LC6 trigger features smooth, crisp performance right out of the box for increased accuracy on the range or in the field.
- Cold hammer-forged barrel results in ultra-precise rifling that provides exceptional accuracy and longevity.
- Rugged, one-piece, stainless steel bolt.
- The Ruger Muzzle Brake System includes a removable, radial-port muzzle brake that significantly reduces felt recoil. For times when the brake is not preferred, it may be replaced by the included dynamically matched muzzle weight. Switching between the brake and the weight will not change the bullet's point of impact for a particular load. The included thread protector may be used if neither the brake nor the weight is desired.
- Also includes: studs for mounting sling swivels.
| STOCK | H-S Precision Tan-Black Speckled Synthetic |
| BARREL LENGTH | 24" |
| BARREL FINISH | Hawkeye Matte Stainless |
| THREAD PATTERN | 5/8" x 24 |
| CAPACITY | 4 |
| SIGHTS | None |
| MATERIAL | Stainless Steel |
| WEIGHT | 8.1 lbs |
| TWIST RATE | 1:8 RH |
| OVERALL LENGTH | 45.75" |
| LENGTH OF PULL | 13.50" |
| CALIBER | 6.5 PRC |
| GROOVES | 5 |
Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number.
Manufacturer: Ruger
PRODUCT SPECIFICATIONS:
- Barrel Length: 24"
- Barrel Thread Pitch: 5/8" x 24 TPI
- Brand: Ruger
- Caliber: 6.5 PRC
- Finish / Color: Black,Tan,Stainless Steel
- Firearm Type: Rifle
- Magazine Capacity: 4
- Models Fit: Ruger Hawkeye
- Type: Bolt Action
Specifications
- Barrel Length: 24"
- Barrel Thread Pitch: 5/8" x 24 TPI
- Brand: Ruger
- Caliber: 6.5 PRC
- Finish / Color: Black,Tan,Stainless Steel
- Firearm Type: Rifle
- Magazine Capacity: 4
- Models Fit: Ruger Hawkeye
- Type: Bolt Action
Rules & Regulations
Firearm Purchasing Policy
Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:
- Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
- Payment must be received via Credit Card
Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.
Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303
Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.
Shipping
WE WILL ONLY SHIP TO VALID FFL DEALERS.
Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:
- Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
- Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.
* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.
Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.
It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.
States with applied firearm restrictions:
Stripped lower receivers will NOT be shipped to the following states:
- Connecticut
- Illinois
- Massachusetts
Complete AR and AK receivers will NOT be shipped to the following states:
- California
- Connecticut
- Illinois
- Maryland
- Massachusetts
- New Jersey
- New York
- Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
- California (No "assault weapons" can be shipped.)
- Connecticut
- Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
- Maryland
- Massachusetts
- New Jersey
- New York
- Rhode Island
- Virginia
- Washington
Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.
Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.
Midwest Gun Works DOES NOT offer refunds in place of the magazines.
States with applied magazine restrictions:
- California - no magazines greater than 10 rounds
- Colorado - no magazines greater than 15 rounds
- Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
- Delaware - no magazines greater than 17 rounds.
- Hawaii - no pistol magazines greater than 10 rounds
- Illinois -
- No pistol magazines greater than 15 rounds
- No rifle magazines greater than 10 rounds
- Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
- Maryland - no magazines greater than 10 rounds
- Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- New Jersey - no magazines greater than 10 rounds
- New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- Rhode Island - no magazines greater than 10 rounds
- Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
- Washington -
- No magazines greater than 10 rounds
- No semi-auto shotgun fixed magazine greater than 7 rounds
- Washington D.C. - no magazines greater than 10 rounds
Exceptions:
- L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
- Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
- Not all of the states listed may have L.E.O. exemptions.
- Please contact us BEFORE placing your order.
- Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
- Midwest Gun Works does NOT make exceptions for this policy.
