Browning Small Bradley Front Sight

Browning Small Bradley Front Sight

Code: B0008199
Not Yet Rated | Write the First Review

Sold Out
Notify Me When Available

Product Description


Description: Browning Small Bradley Front Sight. This is a factory original Browning part. Made to the same high standards as the parts already found in your Browning shotgun. This sight will fit 12 gauge Browning Citori Sporting Clays shotguns and Browning Cynergy shotguns.  This sight bead can also be used on other shotguns that accept a 3x56 front sight bead.

Note: Thread size for this sight bead is 3 x 56

Manufacturer: Browning Arms Co.

Note: It is recommended that all Browning parts be installed by a qualified and trained gunsmith.


  • Brand: Browning
  • Finish / Color: Ivory
  • Firearm Type: Shotgun
  • Gauge: 10 Gauge,12 Gauge,16 Gauge,20 Gauge,28 Gauge,.410 Bore
  • Material: Steel
  • Models Fit: Browning Citori,Browning Cynergy

Know Your Gun


Date & Know Your Browning Citori

The production of the Citori over/under shotgun began in 1973. It has gone through many configurations in the years and is currently still in production.

The information below is critical must have knowledge necessary for ordering parts, wood, and barrels for your Browning BT-100

Manufacture "Configuration Types" of the Citori

  • Pre Type 1: Manufactured 1973 through 1976
  • Type 1: Manufactured 1977 Only
  • Type 2: Manufactured 1978 through 1982
  • Type 3: Manufactured 1983 through present

What "Configuration Type", "Tang Style", and "Forearm Bracket" is your Citori?

  1. Locating your serial number

    The true complete serial number of the Citori can only be found underneath of the TOP LEVER. All other numbers represent production sequence only and are used by the factory to denote what barrel set is paired with an individual receiver. See figure 1-A to locate the top lever on your firearm.

    Figure 1-A

  2. Reading Your Serial Number

    Below use the chart to determine the manufacture year of your Citori.

    Historic Information Serial Number Info

    In 1969 Browning started using two digits for the date of manufacture which was followed by on of the following codes:

    H=12 ga.

    Later the code was changed to J=both gauges

    This was then followed by the serial number beginning with 00001.

    Example: 00001H37 = A 1973 Citori 12 ga. shotgun with a serial number of 00001.

    H=12 ga.
    N=20 ga.
    Later the code was changed to J=both gauges


    In 1975 Browning standardized its serial number identification which it follows to the present day.

    1. Production Sequence Number beginning with 01001 at the start of each year.
    2. Date of Manufacture is a two digit code:
      Z=1, Y=2, X=3, W=4, V=5, T=6, R=7, P=8, N=9, M=0

    Serial Number Example:


    This would be a Citori manufactured in 1976 with the serial number 01001.


    In 1998 Browning redid the standardization of its serial number identifications to work with its new data base program, Oracle.

    1. Serial Number beginning with 01001 at the start of each year.
    2. Date of Manufacture is a two digit code:
      Z=1, Y=2, X=3, W=4, V=5, T=6, R=7, P=8, N=9, M=0
    3. Citori Type: 131=All Citori Shotguns

    Serial Number Example:


    This would be a Citori Shotgun, manufactured in 1999 with the serial number 01001.

    Using the above chart you should now be able to distinguish if your Citori is Pre Type 1, Type 1, Type 2, or Type 3.

    • Pre Type 1 - Manufactured from 1973 - 1976

      Sorry, wood and/or mechanical parts are no longer available for this production era of the Citori.

    • Type 1 - Manufactured only in 1977

      Wood is still available, but in very limited quantities. All mechanical parts are obsolete.

    • Type 2 - Manufactured from 1978 through 1982

      Mechanical parts are still available and are the same as those used in the present manufactured Citori. The wood for this gun is still available, but in very limited quantities.

    • Type 3 - Manufactured from 1983 - Present

      Mechanical parts and wood are still in great supply. "Long Tang" butt stock production has ceased and the supply of these stocks are dwindling rapidly.

  3. Determining Tang Style

    The Citori has been manufactured with 3 "Tang Styles"

    • Straight Tang
    • Long Tang
    • Short Tang

    Use Figure 1-B to determine the "Tang Style" of your Citori.

    Figure 1-B

  4. Determining "Forearm Bracket" Type

    Two "Forearm Bracket" types have been used in the production of Citori's.

    • Short Field/Sporter 2 Hole Bracket
    • Long Target 3 Hole Bracket

    Use Figure 1-C to determine what "Forearm Bracket" your Citori uses. Starting in 1994 and continuing through the present all Citori shotguns have been manufactured with the "Short 2 Hole Bracket".

    Determining Forearm Bracket Type
    Figure 1-C

  5. Thank you very much for taking the time to review the above information. If you are in need of more assistance or you have found the above information a useful shopping tool please contact us at


Customer Ratings & Reviews


Be the first to rate this item!

Write Review