Sig Sauer 7.62 / 300 WIN Stainless Direct Thread Silencer 5/8 x 24
Processing...

Sig Sauer 7.62 / 300 WIN Stainless Direct Thread Silencer 5/8 x 24

Code: SRD762
Not Yet Rated | Write the First Review
$599.99

Sold Out
Sign up with your email to be notified when this product is back in stock!

Product Description

•••••

Description: Sig Sauer 7.62 / 300 WIN Stainless Direct Thread Silencer 5/8 x 24. The SRD762 is an Inconel 718 direct thread silencer. Inconel 718, a nickel alloy stainless steel, provides the highest level of durability, particularly with short-barreled hosts using supersonic ammunition. The 5/8"-24tpi threads match the vast majority of modern sporting rifles in .308/762/300BLK on the market today. The rear mount has wrench flats to torque the silencer to the barrel. These wrench flats can be used as a location to "pin and weld" the silencer to make a shorter barrel over 16" in total length.áThe SRD762 is rated up to 300 Win Mag and any other rifle cartridges that are of equal or less projectile diameter, pressure and case capacity. Examples of this would be .204 Ruger, .223/5.56x45mm, 5.45x39mm, 7.62x39mm, 300BLK, 6.5 Grendel, 6.5 Creedmoor, 6.8 Spc, .260 Remington and other cartridges.

Features:

  • Inconel 718: Provides greater durability for short-barreled and high-round count applications.
  • Taper-Lok: While compatible with all traditional 90-degree shouldered barrels, when using SIG SAUER tapered shouldered barrels, this optimizes alignment, improving accuracy and greatly reducing point-of-impact (POI) shift.
  • Wrench Flats: Easy removal, even with heavy carbon build-up. The wrench will automatically disengage the secondary retention latch with no ratchet teeth to wear out.

Specs:

  • Caliber: 300 Blk, 300 Win Mag and 7.62 NATO
  • Weight: 15.5 oz
  • Diameter: 1.625 in
  • Overall Length: 6.6 in
  • Threads: 5/8 in -24 tpi
  • Attachment Type: Direct Thread
  • Material: Inconel 718 and Stainless Steel

NOTE: Please make sure that this item is legal to own in your area before ordering online.  Please click here for more information.

Specifications

•••••
  • Accessory Attachment Type: Taper-Lock
  • Barrel Thread Pitch: 5/8" x 24 TPI
  • Brand: Sig Sauer
  • Caliber: .30 Cal
  • Finish / Color: Black
  • Material: Steel
  • Suppressor Attachment Method: Direct Thread

Rules & Regulations

•••••

NFA Information

Massachusetts Minnesota Montana North Dakota Hawaii Idaho Washington Arizona California Colorado Nevada New Mexico Oregon Utah Wyoming Arkansas Iowa Kansas Missouri Nebraska Oklahoma South Dakota Louisiana Texas Connecticut New Hampshire Rhode Island Vermont Alabama Florida Georgia Mississippi South Carolina Illinois Indiana Kentucky North Carolina Ohio Tennessee Virginia Wisconsin West Virginia Delaware District of Columbia Maryland New Jersey New York Pennsylvania Maine Michigan Alaska
Suppressors, SBRs & SBSs Legal
Suppressors, SBRs & SBSs Not Legal
Suppressors Only
Suppressors & SBRs Only
SBRs Only
SBRs & SBSs Only

WHAT ARE NFA "CLASS III" ITEMS?
- Class III items include (but are not limited to): machine guns (MG), suppressors/silencers (SS), destructive devices (DD), all other weapons (AOW), short-barreled rifles (SBR) and short-barrel shotguns (SBS).

  • SBR: A rifle having a barrel length LESS than 16" and/or an overall length less than 26".
  • SBS: A shotgun having a barrel length LESS than 18" and/or an overall length less than 26".
  • Suppressor: Suppressor, Silencer, Can, Firearm Muffler are all legally the same thing. A Suppressor is a device which decreases the sound of the expelled round by more than 3 decibels. NOTHING silences a firearm - Some Suppressors make firearms sound quieter than others - very few make a firearm "Hollywood Quiet".
  • AOW Usually refers to a firearm that is manufactured to be disguised as something else:
    • Fountain Pen Guns or Walking Cane Guns are classified as AOW's.
    • A pistol having a vertical foregrip attached is classified as an AOW.
    • A smooth bore firearm (Shotguns have stocks), with a barrel less than 18", and came from the factory with only a pistol grip and has NEVER had a stock attached to it, is classified as an AOW Firearm.
    • The NFA transfer tax for an AOW is only $5 not the "normal" $200 tax stamp cost.

WHY WOULD ANYONE WANT A SUPPRESSOR?
- A silenced firearm is eminently more enjoyable to shoot than one without a suppressor. Suppressors generally increase the accuracy of a host firearm while reducing recoil and eliminating up to 90% of the muzzle signature. Shooters are able to concentrate more on breath control and trigger pull when they are not subjected to the fatigue and distraction of a deafening, bright, muzzle report. Beginning shooters are typically not intimidated when introduced to the shooting sports with a suppressed firearm and are able to easily hear instructions given to them by trainers as the report of a host firearm is reduced to below the OSHA guideline level for hearing damage. Suppressed firearms are also less likely to disturb any people, livestock, or wildlife that may be in close proximity to where you shoot.

YES, CLASS III ITEMS ARE LEGAL, AND THEY ARE EASY TO OBTAIN.
- No, you do not need a license to purchase Class III items but you do have to pay a one-time $200 tax for each Class III item you purchase. You also have to live in a state where Class III items are legal and have to meet certain criteria to be eligible to own one.

- Determine whether or not your state allows you to own a Class III item. Class III items are legal but they are regulated on a per-state basis. However, the National Firearms Act (NFA) branch of the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) ultimately controls any transfers, and all Class III items are registered by this branch. Individuals, corporations, and trusts can legally purchase and possess Class III items in 44 states. Some states differ with which type of Class III items may be owned. However, if you are a dealer, manufacturer, peace officer, or a law enforcement agency or other government agency, there are additional states where you can own a Class III item.

WHO CAN OWN A CLASS III ITEM?
- Anyone who is a legal U.S. resident, 21 years of age and older, a non-felon, and lives in one of the states that allow private ownership of a Class III item. All Class III items are illegal in the following states: CA, HI, IL, NJ, NY, RI & Washington D.C.

I QUALIFY PERSONALLY AND GEOGRAPHICALLY TO OWN A CLASS III ITEM, NOW WHAT?

  1. Choose a product.
  2. Locate a Class III dealer in your state.
  3. After the monetary transaction takes place of the Class III item, it will be assigned to you and separated from the rest of the inventory, ensuring that you have a specific product serial number for your ATF Form 4.
  4. Once you have an assigned product serial number, the Class III dealer will then give you the ATF Form 4 (5320.4), Application for Tax Paid Transfer and Registration of Firearm, in duplicate with the serial number of the product filled out in the appropriate sections. You must fill out the rest of the form in duplicate. You can download the form 4 HERE.
  5. You will send in a $200 check or money order with the completed application, along with a recent photo and fingerprint cards.

STEPS TO COMPLETING YOUR FORM 4 AS AN INDIVIDUAL

  1. Obtain the ATF Form 4 (5320.4) (Application for Tax Paid Transfer and Registration of Firearm) from your dealer in duplicate. Some information the form requires is your name and address, the model of the Class III item you are purchasing, the overall length of the Class III item, the caliber or gauge of the Class III item, the serial number of the Class III item, and the manufacturer's information. Make sure the dealer signs the appropriate fields. Remember to complete all information in duplicate.
  2. Fill out the required information on the front of the form, including your name and address. Complete the back by answering the questions and stating the reason you are acquiring the Class III item. Sign and date the back of the form. Again, remember to complete all information in duplicate.
  3. Affix a recent color passport-sized photograph of yourself on the back of each copy of the form.
  4. Acquire a signature of the chief law enforcement officer of your county or your local sheriff. Don't let this step scare you; this is a routine request. If you feel that your police chief or sheriff will not sign the Form 4 because of personal or political concerns with the Second Amendment, do not worry. You can bypass them by purchasing the Class III item via a Limited Liability Company (LLC), corporation, or under a trust.
  5. While you are at the station obtaining the required signature, ink up your fingers and get two copies of FBI fingerprint cards (FBI Form FD-258) that you will send in with the two duplicates of Form 4.
  6. Place both completed copies of Form 4, the two copies of FBI fingerprint cards, and the completed Certification of Compliance form in an envelope, along with a check or money order (payable to Bureau of Alcohol, Tobacco, Firearms, and Explosives) for $200 and mail to the address listed on Form 4. We advise that you use a check and not a money order so you can see when the ATF cashes your check. This is a great way to confirm if the form actually arrived and is being processed. Otherwise, you may just be waiting for an extended period of time for approval, when, in fact, your paperwork never arrived.
  7. After the ATF approves Form 4, they will put a stamp on one of the two copies you sent them and then send it to the dealer where you purchased the Class III item. The dealer will then notify you that the paperwork has returned and that the Class III item is ready for pickup.

Close

Customer Ratings & Reviews

•••••

Be the first to rate this item!

Write Review