Description: Battle Arms Development Enhanced Lower Parts Kit. This complete parts kit for the AR-15 has most most of the parts needed to complete your stripped lower receiver with enhanced features. The kit includes a lightweight but robust enhanced bolt catch, enhanced single sided safety selector, enhanced one-piece magazine catch, enhanced V-groove magazine release, adjustable tactical pistol grip, takedown and pivot pins, trigger, hammer, disconnector, trigger guard, safety selector, and corresponding detents and springs.
Includes: - (1) Bolt Catch
- (1) Bolt Catch Detent
- (1) Bolt Catch Spring
- (1) Safety Selector
- (1) Safety Selector Detent
- (1) Safety Selector Detent Spring
- (1) Magazine Catch
- (1) Magazine Catch Button
- (1) Magazine Catch Spring
- (1) Magazine Release
- (2) Takedown / Pivot Pins
- (2) Takedown / Pivot Pin Springs
- (2) Takedown / Pivot Pin Detents
|
- (1) Tactical Grip with Hardware
- (1) Trigger Guard
- (1) Trigger Guard Roll Pin
- (1) Mil-Spec Trigger
- (1) Trigger Spring
- (1) Mil-Spec Hammer
- (1) Hammer Spring
- (2) Mil-Spec Hammer / Trigger Pins
- (1) Disconnector
- (1) Disconnector Spring
- (1) Buffer Retainer Detent
- (1) Buffer Retainer Detent Springs
|
Features: - BAD-EBC-IC Enhanced Bolt Catch
- Cost friendly alternative
- Lightweight but Robust Design 0.39oz
- Compatible with Norgon Ambi-Catch Without Interference
- Raised "T-Shaped" Heel Provides Positive and Distinctive Control Surface for Bolt Lock Back
- Bold Horizontal and Diagonal Serrations Provides Positive Purchase
- 8620 Heat Treated Cast Steel
- Black Phosphate Finish
- BAD-E4S-IC Enhanced Single Sided Safety Selector
- Based on our famous BAD-ASS Ambidextrous Safety Selector with distinctive and diagonal serrations
- Single Side Safety Selector (0° - 90° SEMI AUTO)
- Fit all Mil-Spec Dimensioned AR-15 Lower Receiver
- Black Phosphate Finish
- Investment Cast 8620 Heat Treated Steel
- MADE IN U.S.A.
- BAD-EMC-IC Enhanced Magazine Catch
- Process: Investment Cast (Same Process as Mil-Spec)
- Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish
- Construction: One Piece Engineering (Not Two-Piece)
- Design: Lightweight Fluted Design
- Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc.
- Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons
- Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec)
- BAD-EMR Enhanced Magazine Release
- Precision
CNC Machined for billet 7075-T6 Aluminum (not 6061) in an anodized
BLACK finish, the BAD-EMR features a unique, fully solid "V" shaped
button face with horizontal serrations (no through hole)
- The
concave V-Groove button face offers an excellent ergonomic feel and
self-centers the index finger as pressure is applied. The horizontal,
parallel serrations help slippage in the vertical orientation while
minimizing drag in the horizontal direction for finger retraction
- The
BAD-EMR also features a lightweight skeletonized back to offset the
weight gained from the fully solid button face and slightly increased
height to equal the weight of the standard mil-spec magazine release
(approximately 0.002 lbs)
- BAD-EMR is compatible with all lower receivers that accept mil-spec magazine release buttons.
- BAD-ATG™ Adjustable Tactical Grip
- Adjustable
Tactical Grip easily adjusts, with the included hex key, to each of the
three most popular industry proven angles (17, 25, & 33 degrees)
using the Patent Pending adjustable angle mechanism
- The textured finger grooves and ribbed back-strap optimize comfort and provide positive control
- Dimpled air gaps help keep hand dry while offering firm grip texture
- Only 3.0oz complete with screw and washer!
- BAD-EPS Takedown and Pivot Pins
- AR15
/ M16 / M4 Compatible - Fits all AR15/M16/M4 lower receivers with
mil-spec .250in diameter front pivot and rear takedown pin holes
- Patent
Pending Pivot Pin & Takedown Pin Head Designs - Greatly improved
gripping surface and pull strength without the use of oversized heads
- Low Profile Pin Heads - Low drag and never in the way. Lower profile than mil-spec pinheads
- Ambidextrous
Safety Compatible - The Enhanced Takedown Pin (BAD-ETP) head design
does not obstruct the use of the right side ambidextrous safety selector
lever
- Extended Pin Tips (+0.030" over mil-spec) - Added tip
length noticeably aids in starting/pushing the pins out from the left
side of the receiver, without undue protrusion
- Bullet Tip Guide -
Cone shaped recess at both pin tips prevent accidental bullet or tool
slip and reduced the chance of scratching/damaging of the receiver
- Patent
Pending EZ Guide Channel & Magnetic Assist Install - Easy,
hassle-free magnet assisted installation of the EPP (Enhanced Pivot
Pin). No more lost detents and springs
- Each BAD-EPS comes with
(1) BAD-ETP, (1) BAD-EPP, (2) KNS hardened stainless steel detents, (2)
17-7 nickel plated stainless steel pin springs, and (1) high-strength
neodymium magnet for hassle-free magnet assisted installation of the
Enhanced Pivot Pin (BAD-EPP)
|
Manufacturer: Battle Arms Development
PRODUCT SPECIFICATIONS:
- Brand: Battle Arms Development (B.A.D.)
- Caliber: .223 Rem,5.56x45mm
- Finish / Color: Black,Unfinished
- Firearm Type: Pistol,Rifle
- Material: Steel,Polymer
- Models Fit: AR-15
