Sure Cycle Magazine Extension Tube For Benelli Shotguns
Processing...

Sure Cycle Magazine Extension Tube For Benelli Shotguns

Code: BNLEXT
Ratings Snapshot
4.8
out of 5
5 (8)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%

$108.95


Qty

This magazine capacity is restricted in some areas. Please check your State, County and City laws for restrictions before ordering.

  • Please click on the "Important Information" tab, where you can find out more information regarding magazine restrictions.


Product Description

•••••

Description: Sure Cycle Magazine Extension Tube For Benelli Shotguns. Featuring a 316L Stainless Steel Tube, a low drag red anodized follower, stainless steel spring and steel barrel clamp with sling swivel, The Sure Cycle magazine tube extensions are the premier extension for your shotgun. Utilizing a ratchet alloy collar, the Sure Cycle system allows for a very quick change by adding round capacity to the existing magazine tube. This allows the user to convert from normal capacity to higher capacity without alteration of the firearm or OEM tube. Realtree Max-5® magazine tube extensions come with matching camo barrel clamps.

Great for waterfowlers chasing snow geese, 3 gunners and home defense applications. The stainless one-piece construction of the tube is coated in either Black Cerakote or a Hydro Dipped Realtree Max-5® Camouflage making them virtually impervious to any rust or corrosion caused by some of the worst weather conditions.

Available in a 2, 3, 4, 5 and 6 shot capacity, these magazine tube extensions will fit Benelli SBE, SBE II, SBE3, M1 Super 90, M1 and M2 shotguns. These magazine extension tubes normally will not exceed the muzzle of most shotguns with 28" or longer barrels.

All of the Sure Cycle mag tube extensions connect to the existing factory magazine tube, therefore adding the round amount listed to the amount your firearm currently holds with the existing magazine tube.

(Example) If your shotgun currently holds three rounds in the magazine tube and one in the chamber, then adding a 6 shot tube will bring the total to ten rounds. If the shotgun holds two rounds in the magazine tube and one round in the chamber, adding a three shot tube will then increase the capacity to six rounds.

Fits:

  • Benelli Super Black Eagle, Super Black Eagle II, Super Black Eagle 3
  • Benelli M1 Super 90
  • Benelli M1 and M2

Features:

  • Magazine Tube Constructed of 316L Stainless Steel
  • Cerakote Black or Realtree Max-5® Finish
  • Stainless Steel Magazine Spring
  • 6061 T6 Aluminum Low Drag Follower, Red Anodized for Visibility
  • Steel Barrel Clamp with Sling Swivel,
    • Black Cerakote for Black Models
    • Realtree Max-5® Camo for Camouflaged Models
  • Ratchet Base Collar for Tight Fit
  • Manufactured in the USA
Weight:
2 Shot 8 oz.
3 Shot 9 oz.
4 Shot 10 oz.
5 Shot 14 oz.
6 Shot 14 oz.
Overall Length:
2 Shot 5-1/2"
3 Shot 9"
4 Shot 12"
5 Shot 14"
6 Shot 16-1/2"
CODE COLOR MAGAZINE CAPACITY
BNLEXT2 Black
2 Shot
BNLEXT3 Black 3 Shot
BNLEXT4
Black 4 Shot
BNLEXT5 Black 5 Shot
BNLEXT6 Black 6 Shot
BNLEXT2-M5
Realtree Max-5®
2 Shot
BNLEXT3-M5
Realtree Max-5® 3 Shot
BNLEXT4-M5
Realtree Max-5® 4 Shot
BNLEXT5-M5
Realtree Max-5® 5 Shot
BNLEXT6-M5
Realtree Max-5® 6 Shot

Manufacturer: Sure Cycle

FAQ:

Q.) Why a stainless steel tube and not an aluminum tube?
A.) Utilizing stainless steel allows the inside of the tube to be machined to an extremely smooth mirror-like finish. This allows both the additional rounds, follower, and spring to operate smoother, and eliminates grooves from being worn inside an aluminum tube.
Stainless tubes can be more precisely machined to ensure an exact flush contact point to the existing OEM tube, resulting in a perfect smooth finish.

Q.) Can I use my existing magazine tube follower with the Sure Cycle System?
A.) Yes. If you wish to use the OEM follower you can. However, some manufactures have switched to plastic followers for cost saving. While they can be used, we recommend the aluminum follower.

Q.) The spring that came with my Sure Cycle System is much longer than the OEM spring.
A.) The extra spring length is needed to push the heavier payload of rounds down the tube.

Q.) Can I use a Sure Cycle Mag tube extension that sticks out beyond the muzzle of the gun?
A.) Yes. This is very common among thee gunners and competition shooters using Sure Cycle Tubes. You will experience a lot of buildup of powder and residue on the top side of the tube that can be easily wiped off. Do not add any type of clamp or accessory to the tube beyond the barrel length.

Q.) I ordered a shorter tube (2, 3 shot). It does not seem I need the clamp that came with it.
A.) We include a clamp with all of the tubes. The 2 and 3 shot tubes can be used without the clamp if desired.

Q.) After shooting a while, the clamp seemed to loosen and move. Is this normal?
A.) It is recommended that you cover the area of the barrel that the clamp tightens to with a small section of electrical tape. This will give it a firm hold area and usually avoid the barrel from having any type of mark, rub or scratch.

Q.) I lost the directions for installation. Where can I find another copy?
A.) Directions for install are available here: BNLEXT Installation Instructions

Q.) Can you Cerakote a tube with a custom color?
A.) Yes. If you are looking for this option please let us know. Pricing will only be quoted per request.

PRODUCT SPECIFICATIONS:
  • Brand: Sure Cycle
  • Finish / Color: Black Cerakote,Realtree Max-5®,Stainless Steel
  • Firearm Type: Shotgun
  • Gauge: 12 Gauge
  • Magazine Capacity: 2,3,4,5,6
  • Material: Steel,Aluminum
  • Make: Benelli
  • Models Fit: Benelli M1 Super 90,Benelli M2,Benelli Super Black Eagle,Benelli Super Black Eagle II,Benelli Super Black Eagle 3

Specifications

•••••
  • Brand: Sure Cycle
  • Finish / Color: Black,Max-5,Stainless Steel
  • Firearm Type: Shotgun
  • Gauge: 12 Gauge
  • Magazine Capacity: 2,3,4,5,6
  • Material: Steel,Aluminum
  • Models Fit: Benelli M1 Super 90,Benelli M2,Benelli Super Black Eagle,Benelli Super Black Eagle II,Benelli Super Black Eagle 3

Additional Resources

•••••

Customer Ratings & Reviews

•••••
10
Ratings Snapshot
4.8
out of 5
5 (8)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
4.8
out of 5
5 (8)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
10 Total Reviews
Sure Cycle Mag Extension
4 out of 5
Deadeye Dave
Location: MN
Date: September 29, 2020
Mag extension was exactly as advertised. Install was easy, works perfectly.
Recommended
Camo Mag Extender
4 out of 5
pedro71
Location: Milwaukee, WI
Date: September 18, 2020
Very simple to assemble onto my SBE II. Works great. Only complaint is there is a 1/8" area of metal not covered up by the camo coating.
Recommended
Works as advertised
5 out of 5
SBE3 Lefty
Location: Kansas City, MO
Date: September 11, 2020
Got the 6 round extension tube in Camo. Matched the SBE3 perfectly and cycled all 10 shells (yes, can get 10, 2 3/4” shells in the tube👍) without any problems at all. Ran about 300 target rounds through it over the weekend no problem. I was concerned at first that getting the last few shells in the tube would suck because of the much longer spring under serious compression, but even that wasn’t a problem at all. Did everything it said it was going to do.
Recommended
Works as expected
5 out of 5
Greg
Location: Maryland
Date: September 9, 2020
Wanted to get more shots for resident goose season and snows, so I figured I'd try this out. It was very easy to install and took maybe a minute or two. I ran it through its paces on a hunt the other day and it worked well; no issues feeding shells into the chamber all the way through emptying the magazine several times.
Recommended
magazine extension for super black eagle 3
5 out of 5
biggunA1
Location: rochester new york
Date: July 10, 2020
great product fits perfect and works perfect.
Recommended
very pleased
5 out of 5
Joshua Onion
Location: Homer, AK
Date: May 9, 2020
I got the longest and my SBE3 now holds 10 shells of 2 3/4" in the mag! It comes out exactly to the end of my 26" barrel with extended choke. Still feels and swings fine even full. It cycles perfectly everything I've fed it so far. I believe the stainless is the best material choice for this application and its manufacture is executed perfectly. Thank you!
Recommended
Easy assembly
5 out of 5
EG
Location: WDC
Date: March 25, 2020
MGW shipped this promptly and it comes with assembly instructions that make it easy enough to put on my SBE3. I have not had a chance yet to shoot it and monitor cycling but so far it seems well-built and I don't expect problems.
Recommended
Looks great as expected. Easy to install
5 out of 5
Benelli SBE2 Mag Extender
Location: MN
Date: March 25, 2020
Haven't gotten to shoot yet, but this extended mag was easy to install, it looks great (camo matches), and seems sturdy. I was worried that the test in the pictures with the brand name would be on the mag, but was happy to find that they didn't put giant white branding on it :) Item arrived on time and experience was good.
Recommended
Magazine extension
5 out of 5
Ryan
Location: Kansas
Date: March 5, 2020
Got the 4 round extension and worked real well. Emptied several times on snows without issue using 3 inch
Recommended
Easy to assemble
5 out of 5
J.E
Location: New York
Date: March 3, 2020
Couldn’t be happier. I recently purchased this extension for a snow goose hunt. Very simple to install and gun cycled as normal.
Recommended
10 Total Reviews