Desert Tech MDR Semi Auto Rifle, 5.56mm/.223, 16" FDE
Processing...

Desert Tech MDR Semi Auto Rifle, 5.56mm/.223, 16" FDE

Code: DT-MDR-S-556-16-F
Not Yet Rated | Write the First Review
$2,274.00
Sold Out
Sign up with your email to be notified when this product is back in stock!

Product Description

•••••

Description: Desert Tech MDR Semi Auto Rifle, 5.56mm/.223, 16" FDE. The MDR (Micro Dynamic Rifle) designed by Desert Tech is manufactured to the highest performance standards to provide the operator with a fully capable long rifle in the compact urban form factor. With a bullpup design and a 16" barrel chambered in .223 Wylde (.223 Rem/5.56x45mm), this two-toned flat dark earth finished chassis rifle boasts ambidextrous controls and 30 round capacity P-MAG magazine. The well balanced and modern design of this rifle gives the shooter excellent target acquisition, maneuverability, and comfort in the field. The MDR is the future of urban rifle design, being far shorter than any conventional rifle of similar power. Desert Tech rifles are proudly made in the USA.

The MDR is designed for future defense needs. Its compact size and superior ergonomics maximize its portability without sacrificing speed, power, or precision. The MDR allows mission specific adaptability by changing the rifle's length, sound signature, and/or caliber. Its fully-ambidextrous design allows seamless shoulder transitions.

Features:

CALIBER.223 Wylde (.223 Rem/5.56x45mm)  AMBIDEXTROUS
CAPACITY30  ERGONOMIC
CHASSIS FINISHFlat Dark Earth  LIGHTWEIGHT
BARREL LENGTH16 in / 40.64 cm  BALANCED
OVERALL LENGTH26.2 in / 66.55 cm  COMPACT
WEIGHT8.3 lb / 3.76 kg  FORWARD EJECT
BARREL TWIST1 in 8  CONVERTIBLE
BARREL THREADS1/2" x 28  NON-RECIPROCATING

MUZZLE DEVICES
Installed is a 3 pronged muzzle device on this rifle using the 1/2" x 28 threading. Ready for both muzzle breaks and over-the-barrel suppressors, the use of these devices are designed to increase accuracy, shooter recovery, and reduced recoil. Accuracy improves due to the Desert Tech design which immediately strips excess gases away from projectiles.

BARREL
Stainless steel floating barrel with a black finish. The 16" barrel seats further back with the bullpup design to increase balance which noticeably improves accuracy as a result.

HANDGUARD & ACCESSORY MOUNTING
The free-floated hand-guard fits seamlessly into the MDR design and provides a continued Picatinny rail on top of the rifle as well as an accessory / vent system.

FORWARD EJECT
With the MDR's bullpup design, the rifle expels spent brass via a forward eject that can be configured to eject to either the right (default) or left side of the firearm..

SAFETY
The ambidextrous safety switch easily actuated from firing position.

CHEEK PIECE
The non-slip cheek piece on the stock provides a more comfortable shouldering of the firearm.

ACCESSORY RAIL
The MDR upper receiver, along with the handguard, features nearly 14" of Picatinny rail to install any number of sighting accessories.

FREE FLOATED BARREL
This 16" barrel is free floated within the handguard and features an installed 3 prong muzzle brake. The free floating barrel provides better heat dispersion and quicker caliber conversion when out in the field.

BULLPUP DESIGN
The bullpup design of the MDR combines both the long range accuracy of a full sized rifle with the compact urban chassis of a mid range gun. The balance and overall maneuverability of the rifle increase with this futuristic and modern design.

Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number.

Manufacturer: Desert Tech

PRODUCT SPECIFICATIONS:

  • Barrel Length: 16"
  • Barrel Thread Pitch: 1/2" x 28 TPI
  • Brand: Desert Tech
  • Caliber: .223 Rem,5.56x45mm
  • Finish / Color: Flat Dark Earth
  • Firearm Type: Rifle
  • Magazine Capacity: 30
  • Models Fit: Desert Tech MDR

Specifications

•••••
  • Barrel Length: 16"
  • Barrel Thread Pitch: 1/2" x 28 TPI
  • Brand: Desert Tech
  • Caliber: .223 Rem,5.56x45mm
  • Finish / Color: Flat Dark Earth
  • Firearm Type: Rifle
  • Magazine Capacity: 30
  • Models Fit: Desert Tech MDR
  • Type: Semi-Auto

Rules & Regulations

•••••

Firearm Purchasing Policy

Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:

  1. Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
  2. Payment must be received via Credit Card

Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.

Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303

Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.

Shipping

WE WILL ONLY SHIP TO VALID FFL DEALERS.

Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:

  • Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
  • Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.

* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.

Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.

It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.

States with applied firearm restrictions:

  • Stripped lower receivers will NOT be shipped to the following states:

    • Connecticut
    • Illinois
    • Massachusetts

  • Complete AR and AK receivers will NOT be shipped to the following states:

    • California
    • Connecticut
    • Illinois
    • Maryland
    • Massachusetts
    • New Jersey
    • New York
  • Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
    • California (No "assault weapons" can be shipped.)
    • Connecticut
    • Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
    • Maryland
    • Massachusetts
    • New Jersey
    • New York
    • Washington

Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.

Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.

Midwest Gun Works DOES NOT offer refunds in place of the magazines.

States with applied magazine restrictions:

  • California - no magazines greater than 10 rounds
  • Colorado - no magazines greater than 15 rounds
  • Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
  • Delaware - no magazines greater than 17 rounds.
  • Hawaii - no pistol magazines greater than 10 rounds
  • Illinois -
    • No pistol magazines greater than 15 rounds
    • No rifle magazines greater than 10 rounds
    • Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
  • Maryland - no magazines greater than 10 rounds
  • Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
  • New Jersey - no magazines greater than 10 rounds
  • New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
  • Rhode Island - no magazines greater than 10 rounds
  • Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
  • Washington -
    • No magazines greater than 10 rounds
    • No semi-auto shotgun fixed magazine greater than 7 rounds
  • Washington D.C. - no magazines greater than 10 rounds

Exceptions:

  • L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
    • Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
  • Not all of the states listed may have L.E.O. exemptions.
    • Please contact us BEFORE placing your order.
  • Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
    • Midwest Gun Works does NOT make exceptions for this policy.

Close

Customer Ratings & Reviews

•••••

Be the first to rate this item!

Write Review

You May Also Like