Faxon ARAK-21 12.5" 7.62x39 Complete Upper
Product Description
Description: Faxon ARAK-21 12.5" 7.62x39 Complete Upper. The ARAK-21 is a gas piston-actuated, complete upper receiver assembly designed to interface with the standard AR-15 platform seamlessly. The total extent of the interface is simply the takedown pin and the pivot pin. The new ARAK-21 upper receiver offers you all its features with no change to your current lower receiver and can be installed in less than one minute with no tools. The ARAK-21 upper receiver is shipped with one "Barrel Assembly Unit" (BAU).
The BAU is comprised of the barrel, gas block, muzzle brake, gas piston, gas adjuster, and barrel trunnion. The only removable part of this assembly is the gas adjuster knob. The gas adjuster knob has 4 settings. Three of the settings allow different gas flows for optimum operation, and one setting blocks the gas flow for a single shot operation.
The upper receiver includes the charging block, standard charging handle, lower forearm with screws, three aluminum full-length Picatinny rails, three insulating shims, bolt carrier assembly, lower recoil lug with spring guide rod, and dual recoil spring system. Along with your new ARAK-21 upper receiver, you will receive your owner's manual, and two Allen wrenches that will fit the screws that attach the lower forearm, and the front Picatinny rails.
Due to the unique and innovative features of the ARAK-21 upper receiver, there are very few parts that are interchangeable with a standard AR-15. The firing pin, extractor spring, and ejector spring are the only parts that are standard and interchangeable with an AR-15 upper receiver.
Features:
- The upper receiver is fully machined from an aircraft grade 6061-T6 aluminum billet in a one-piece design that incorporates a full-length Picatinny rail (Mil-STD-1913) on the top and three additional rails on the muzzle end of the receiver, making it a full M4 style quad rail upper. The top picatinny rail is laser engraved for optic placement. There are also half-length picatinny rails available.
- Long stroke variable setting gas piston system. There are three options for gas flow and one for no gas flow. This allows for single-shot operation. There is also a clean-out port for the gas block between the gas cylinder, and the barrel.
- The charging handle is ambidextrous, non-reciprocating, foldable, spring returned, and is easily relocated from left to right side without tools by the operator.
- Model "39" Eight (8) lug bolt design with an involute profile for both right and left-hand versions. The extractor is positioned at 3 o'clock. This allows for a left-hand version to use the same bolt by simply removing the cam pin, rotating 180 degrees, and reinstalling the cam pin.
- A self-contained firing pin retention system is enclosed in a rectangular bolt carrier that no longer requires a cotter pin.
- Bolted in hardened steel rail system for the bolt carrier to ride on. This allows a metal-on-metal wear surface for better wear characteristics and a much smoother operation.
- The ARAK-21 system allows for a folding stock to be added, as the recoil system does not extend beyond the upper receiver to fully operate. This eliminates the noise and feel of the buffer tube cycling back and forth.
Includes:
- ARAK-21 Upper - Black Ambidextrous Ejection
- 12.5" 7.62x39 Medium Barrel
- MuzzLok 3 Port Muzzle Brake
- Shipping Box
- Manual
- BAU Removal Tools
Manufacturer: Faxon Firearms
Note: This upper is for use on an AR Pistol or for NFA registered firearms only. It is the responsibility of the purchaser to ensure this upper is being used in a lawful manner.
PRODUCT SPECIFICATIONS:
- Barrel Length: 12-1/2"
- Barrel Thread Pitch: 5/8" x 24 TPI
- Brand: Faxon Firearms
- Caliber: 7.62x39mm
- Finish / Color: Black
- Firearm Type: Rifle
- Material: Aluminum,Steel
- Models Fit: AR-15
Specifications
- Barrel Length: 12-1/2"
- Barrel Thread Pitch: 5/8" x 24 TPI
- Brand: Faxon Firearms
- Caliber: 7.62x39mm
- Finish / Color: Black
- Firearm Type: Rifle
- Material: Aluminum,Steel
- Models Fit: AR-15
Rules & Regulations
NFA Information
WHAT ARE NFA "CLASS III" ITEMS?
- Class III items include (but are not limited to): machine guns (MG), suppressors/silencers (SS), destructive devices (DD), all other weapons (AOW), short-barreled rifles (SBR) and short-barrel shotguns (SBS).
- SBR: A rifle having a barrel length LESS than 16" and/or an overall length less than 26".
- SBS: A shotgun having a barrel length LESS than 18" and/or an overall length less than 26".
- Suppressor: Suppressor, Silencer, Can, Firearm Muffler are all legally the same thing. A Suppressor is a device which decreases the sound of the expelled round by more than 3 decibels. NOTHING silences a firearm - Some Suppressors make firearms sound quieter than others - very few make a firearm "Hollywood Quiet".
- AOW Usually refers to a firearm that is manufactured to be disguised as something else:
- Fountain Pen Guns or Walking Cane Guns are classified as AOW's.
- A pistol having a vertical foregrip attached is classified as an AOW.
- A smooth bore firearm (Shotguns have stocks), with a barrel less than 18", and came from the factory with only a pistol grip and has NEVER had a stock attached to it, is classified as an AOW Firearm.
- The NFA transfer tax for an AOW is only $5 not the "normal" $200 tax stamp cost.
WHY WOULD ANYONE WANT A SUPPRESSOR?
- A silenced firearm is eminently more enjoyable to shoot than one without a suppressor. Suppressors generally increase the accuracy of a host firearm while reducing recoil and eliminating up to 90% of the muzzle signature. Shooters are able to concentrate more on breath control and trigger pull when they are not subjected to the fatigue and distraction of a deafening, bright, muzzle report. Beginning shooters are typically not intimidated when introduced to the shooting sports with a suppressed firearm and are able to easily hear instructions given to them by trainers as the report of a host firearm is reduced to below the OSHA guideline level for hearing damage. Suppressed firearms are also less likely to disturb any people, livestock, or wildlife that may be in close proximity to where you shoot.
YES, CLASS III ITEMS ARE LEGAL, AND THEY ARE EASY TO OBTAIN.
- No, you do not need a license to purchase Class III items but you do have to pay a one-time $200 tax for each Class III item you purchase. You also have to live in a state where Class III items are legal and have to meet certain criteria to be eligible to own one.
- Determine whether or not your state allows you to own a Class III item. Class III items are legal but they are regulated on a per-state basis. However, the National Firearms Act (NFA) branch of the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) ultimately controls any transfers, and all Class III items are registered by this branch. Individuals, corporations, and trusts can legally purchase and possess Class III items in 44 states. Some states differ with which type of Class III items may be owned. However, if you are a dealer, manufacturer, peace officer, or a law enforcement agency or other government agency, there are additional states where you can own a Class III item.
WHO CAN OWN A CLASS III ITEM?
- Anyone who is a legal U.S. resident, 21 years of age and older, a non-felon, and lives in one of the states that allow private ownership of a Class III item. All Class III items are illegal in the following states: CA, HI, IL, NJ, NY, RI & Washington D.C.
I QUALIFY PERSONALLY AND GEOGRAPHICALLY TO OWN A CLASS III ITEM, NOW WHAT?
- Choose a product.
- Locate a Class III dealer in your state.
- After the monetary transaction takes place of the Class III item, it will be assigned to you and separated from the rest of the inventory, ensuring that you have a specific product serial number for your ATF Form 4.
- Once you have an assigned product serial number, the Class III dealer will then give you the ATF Form 4 (5320.4), Application for Tax Paid Transfer and Registration of Firearm, in duplicate with the serial number of the product filled out in the appropriate sections. You must fill out the rest of the form in duplicate. You can download the form 4 HERE.
- You will send in a $200 check or money order with the completed application, along with a recent photo and fingerprint cards.
STEPS TO COMPLETING YOUR FORM 4 AS AN INDIVIDUAL
- Obtain the ATF Form 4 (5320.4) (Application for Tax Paid Transfer and Registration of Firearm) from your dealer in duplicate. Some information the form requires is your name and address, the model of the Class III item you are purchasing, the overall length of the Class III item, the caliber or gauge of the Class III item, the serial number of the Class III item, and the manufacturer's information. Make sure the dealer signs the appropriate fields. Remember to complete all information in duplicate.
- Fill out the required information on the front of the form, including your name and address. Complete the back by answering the questions and stating the reason you are acquiring the Class III item. Sign and date the back of the form. Again, remember to complete all information in duplicate.
- Affix a recent color passport-sized photograph of yourself on the back of each copy of the form.
- Acquire a signature of the chief law enforcement officer of your county or your local sheriff. Don't let this step scare you; this is a routine request. If you feel that your police chief or sheriff will not sign the Form 4 because of personal or political concerns with the Second Amendment, do not worry. You can bypass them by purchasing the Class III item via a Limited Liability Company (LLC), corporation, or under a trust.
- While you are at the station obtaining the required signature, ink up your fingers and get two copies of FBI fingerprint cards (FBI Form FD-258) that you will send in with the two duplicates of Form 4.
- Place both completed copies of Form 4, the two copies of FBI fingerprint cards, and the completed Certification of Compliance form in an envelope, along with a check or money order (payable to Bureau of Alcohol, Tobacco, Firearms, and Explosives) for $200 and mail to the address listed on Form 4. We advise that you use a check and not a money order so you can see when the ATF cashes your check. This is a great way to confirm if the form actually arrived and is being processed. Otherwise, you may just be waiting for an extended period of time for approval, when, in fact, your paperwork never arrived.
- After the ATF approves Form 4, they will put a stamp on one of the two copies you sent them and then send it to the dealer where you purchased the Class III item. The dealer will then notify you that the paperwork has returned and that the Class III item is ready for pickup.
