Wilson Combat AR-10 Billet Upper / Lower Receiver Matched Set, Anodized Black
Product Description
Description: Wilson Combat AR-10 Billet Upper / Lower Receiver Matched Set, Anodized Black. Machined from aerospace aluminum billet stock, this upper and lower receiver set from Wilson Combat is designed to be the base for the ultimate precision tactical AR-10 rifle. Specially engineered to address structural design weaknesses found in standard USGI lower receivers and American made, this multi caliber receiver set is the ideal start for your AR platform project chambered in either .380 Win or 7.62x51mm. The set has a black anodized finish and the lower is enhanced with an oversized EDM machined magazine well for quicker, smoother reloading and an integral trigger guard for added receiver strength and ease of use with gloved hands. The upper receiver features a precise bolt raceway for smooth chambering. This stripped AR-10 upper and lower from Wilson Combat provides the strength and durability that any quality AR needs.
Designed by Bill Wilson and the Wilson Combat design team to be the base for the ultimate precision tactical AR-10 rifle, the BILLet-AR matched upper and lower receiver set is 100% machined in the Wilson Combat Berryville, AR facility. The Wilson Combat BILLet-AR receiver set was engineered from the ground up to address structural design weaknesses in standard USGI receivers and enhance overall tolerances which improve shot to shot consistency.
The BILLet-AR upper receiver has a precise bolt raceway for smoother chambering and more rigid receiver walls to reduce firing flex. The BILLet-AR lower receiver has been enhanced with an oversize magazine well for smooth reloads and an integral trigger guard for gloved use and added lower receiver strength.
Features:
- CNC machined from 7075-T6 aerospace aluminum billet stock
- Picatinny Top Rail
- Shell Deflector
- Undersize bolt raceway for smoother chambering, improved feeding and enhanced recoil dynamics
- Smooth side profile without forward assist for maximum accuracy potential
- Oversize, EDM-cut magazine well for fast reloads
- Precision threaded receiver and reamed pin holes
- Hex Screw Bolt Catch Retention
- Hand prepped for a flawless surface finish
- Anodized Finish
Manufacturer: Wilson Combat
Note: This item will only ship to a Federal Firearms License Dealer (FFL). Before this product is shipped your FFL Dealer must email or fax a valid FFL to Midwest Gun Works. It is the responsibility of the purchaser, to check your local laws before ordering products from Midwestgunworks.com. Please check your State, County, and City laws for restrictions before ordering. Please have your FFL dealer fax their FFL to 636-475-7303 or email to [email protected]. When sending the FFL to Midwest Gun Works be sure to include the customer name and order number
PRODUCT SPECIFICATIONS:
- Brand: Wilson Combat
- Caliber: .308 Win,7.62x51mm
- Finish / Color: Black
- Firearm Type: Pistol,Rifle
- Material: Aluminum
- Models Fit: AR-10
- Type: Semi-Auto
Specifications
- Brand: Wilson Combat
- Caliber: .308 Win,7.62x51mm
- Finish / Color: Black
- Firearm Type: Pistol,Rifle
- Material: Aluminum
- Models Fit: AR-10
- Type: Semi-Auto
Rules & Regulations
Firearm Purchasing Policy
Midwest Gun Works sells firearms only in accordance with all Federal, State & Local firearms regulations. Midwest Gun Works will only ship a Firearm to a Federal Firearms License holder (FFL). FFL holder must be located within the United States. We do not and will not ship firearms internationally. In order for Midwest Gun Works to ship your firearm purchase, you must complete the following steps:
- Midwest Gun Works must receive a legible and SIGNED copy of the Federal Firearms License from the dealer that will receive the firearm. This can be done via fax, email or standard mail.
- Payment must be received via Credit Card
Important note: Please insure that you or your FFL dealer includes your name and order number with FFL when Emailed or faxed.
Please have your FFL dealer email their FFL to [email protected] or fax it to 636-475-7303
Please contact us directly if you have any questions pertaining to transaction procedures or details concerning the Firearm being purchased.
Shipping
WE WILL ONLY SHIP TO VALID FFL DEALERS.
Once payment and a signed FFL copy have been received, Midwest Gun Works will then process and prepare the firearm for shipment. All firearms are typically shipped via UPS or USPS Priority Mail. Most shipments going to Alaska or Hawaii will be shipped via USPS. Shipping rates vary according to geographical location and final value of Firearm being purchased. Minimum shipping rates are as follows:
- Long Guns: Minimum shipping rate is set at $32.00, with any additional charges being added once final value and location of receiver have been established.
- Hand Guns: Minimum shipping rate is set at $41.00, with any additional charges being added once final value and location of receiver have been established.
* Any additional shipping charges not shown during online check-out will be presented to the customer for approval prior to processing the order.
Once your FFL Dealer receives the firearm, you as the purchaser will then be required to fill out all pertinent paperwork with them in order to take possession of your firearm.
It is the responsibility of the purchaser to make sure that they comply with all federal, state and local laws. If you need more information about restrictions in your area please visit the ATF's website by clicking HERE.
States with applied firearm restrictions:
Stripped lower receivers will NOT be shipped to the following states:
- Connecticut
- Illinois
- Massachusetts
Complete AR and AK receivers will NOT be shipped to the following states:
- California
- Connecticut
- Illinois
- Maryland
- Massachusetts
- New Jersey
- New York
- Non-Compliant AR or AK models & "Assualt Weapons" will NOT be shipped to the following states:
- California (No "assault weapons" can be shipped.)
- Connecticut
- Illinois (Includes shotguns with fixed mags over 5 rounds or any shotgun that accepts detachable magazines)
- Maryland
- Massachusetts
- New Jersey
- New York
- Washington
Midwest Gun Works DOES NOT ship high-capacity magazines (those greater than 10 rounds) with firearms to the states listed below.
Midwest Gun Works WILL NOT replace high capacity magazines with state compliant magazines.
Midwest Gun Works DOES NOT offer refunds in place of the magazines.
States with applied magazine restrictions:
- California - no magazines greater than 10 rounds
- Colorado - no magazines greater than 15 rounds
- Connecticut - no magazines greater than 10 rounds (larger with a valid permit.)
- Delaware - no magazines greater than 17 rounds.
- Hawaii - no pistol magazines greater than 10 rounds
- Illinois -
- No pistol magazines greater than 15 rounds
- No rifle magazines greater than 10 rounds
- Chicago, Highland Park, Cook County, Dolton, Homewood & Oak Park- no magazines greater than 10 rounds
- Maryland - no magazines greater than 10 rounds
- Massachusetts - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- New Jersey - no magazines greater than 10 rounds
- New York - no pistol or rifle magazines over 10 rounds and no detachable shotgun magazines over 5 rounds
- Rhode Island - no magazines greater than 10 rounds
- Vermont - no pistol magazines over 15 rounds and no rifle or shotgun magazines over 10 rounds
- Washington -
- No magazines greater than 10 rounds
- No semi-auto shotgun fixed magazine greater than 7 rounds
- Washington D.C. - no magazines greater than 10 rounds
Exceptions:
- L.E.Os must provide both their credentials and a letterhead signed by their department's superior officer stating that the firearm will be used in the execution of the L.E.O's duties.
- Midwest Gun Works only recognizes City Police Officers, County Sheriff Deputies, and State Police (including Highway Patrol) as L.E.Os.
- Not all of the states listed may have L.E.O. exemptions.
- Please contact us BEFORE placing your order.
- Midwest Gun Works does NOT ship directly to L.E.O.; the order must go to an FFL.
- Midwest Gun Works does NOT make exceptions for this policy.
