Superlative Arms "Bleed Off" .750" Adjustable Stainless Gas Block, Clamp-On

Description: Superlative Arms "Bleed Off" .750" Adjustable Stainless Gas Block, Clamp-On. Showcasing quality stainless steel matte construction, this Superlative Arms "Bleed Off" .750 adjustable gas block is the perfect upgrade or addition to your custom workshop project chambered in .223 Rem, 5.56x45mm, .308 Win, 7.62x51mm, and .300 Blackout. This clamp-on gas system showcases the "Bleed Off" tech to allow the adjustment to gas flow by bleeding the gas out of the front of the block instead of restricting the flow like conventional adjustable blocks. The gas block has a 1.00" length and barrel diameter of 0.750". This gas block is perfect for upgrading or replacing and will help keep your favorite build in top operating and reliable condition.

Features:

• The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas and pressure are bled out of the block allowing the system to run much cleaner and cooler.Reduction of wear on the bolt carrier group components.
• Reduction of felt recoil allowing for faster follow-up shots.
• Patented adjustment detent is located outside of the block and therefore no contamination.
• In bleed off mode the gas adjustment screw does not restrict the gas flow; therefore, there is no erosion or seizing of the screw, and no loss of detent due to carbon build up. Although it is removable, Superlative Arms have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
• When using SBR's and/or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back.
• Gas Block Material: 416 SS
• Finish: Stainless Steel, Matte
• Barrel Diameter: 0.750"
• Weight: 1.68 oz.
• Length: 1.00"
• Attachment Type: Clamp On 
• Gas Adjustment:  (Patented) 30 locked positions, front of block
• Bleed Off Port:  (Patented) Front of block which vents forward away from operator

Included:

• Gas Block - Assembled
• (2) 6-32 x 3/8" Torx T-15 cap screws
• (1) Gas Tube Roll Pin
• (1) 3/32 x 6" L-Shaped Hex Key, Ball-end / Torx T-15 Too
• (1) Instructions for installation and setup

Manufacturer: Superlative Arms

Note: It is recommended that all Superlative Arms parts be installed by a qualified and trained gunsmith.

PRODUCT SPECIFICATIONS:

• Brand: Superlative Arms
• Caliber: .223 Rem,5.56x45mm,.308 Win,7.62x51mm,.300 Blackout
• Finish / Color: Stainless Steel
• Firearm Type: Pistol,Rifle
• Material: Steel
• Models Fit: AR-15,AR-10